Home Profile Products Enquiry Policy Terms Dealers Contact LOGIN
Optimized for IE 6.0+, NN 6.0+, Opera or Firefox at 800x600 resolution.
AUTOPRO AUTOPRO
New Page 1


Search by
TYPE
OUTPUT
APPLICATION

Or browse through our product categories

Portable Indicators

Loop Powered Indicators

Digital Temperature Indicators

Mains Powered Indicators

Multipoint Indicators

2 Wire Isolated Transmitters

4 Wire isolated Transmitters

Digital Process Controllers(72x72x110mm)

Digital process Controllers(96x96x110mm)

Digital process Controllers(96x96x110mm) with large display

Digital process Controllers(96x192x110mm)

µC Based Mini Controllerss

µC Based Timers

Universal Counters

Linearised Indicators & Controllers

µC Based Flow Controllers

Flow Indicators & Controllers

Special PID & Other Controllers

Multi Channel Scanners & PID Controllers


01-03-2007

The site has a new look.

Product details added:
A4454-Analog I/P Rate Indicator & Batch Totaliser

A4455-Analog I/P Flow Rate Indicator with Sqr. Root

A4458-Pulse I/P Rate Indicator & Batch Totaliser

Dimensional details have been added to all products with available online data.

Common Specifications for following categories have been added to the site. (Check out the link in left side menu)
Digital Process Controllers (96 x 96 x 110mm)

Digital Process Controllers (72 x 72 x 110mm)

2 & 4 wire Isolated Process Transmitters


A4444 - Autotune PID Controller
A3543 - Digital Temperature Controller
A5680 - 8 Channel Digital Scanner

Download our product catalogues

New Page 1



Go to Products HOME

Ask for Catalogue


   AUTOPRO PRODUCTS ... Updated 01-03-2007
µC BASED FLOW INDICATORS & CONTROLLERS WITH ANALOG OUTPUT
A5456 - PULSE I/P 2 SETPOINT BATCH CONTROLLER
Features Description Applications Specifications Ordering
Info
Dimensional
Details
Wiring
Diagram

     SPECIFICATIONS

New Page 1
INPUT
Input Sources (specify) 1.  Voltage pulse 5 to 50 V DC
2.  Inductive proximity switch
3.  Contact closure or opening
Input Signal Range 0.01 to 29.99 Hz
Input & Control Isolation 500 V DC @ 1 min
External Control Inputs Batch enable & reset
Flow Constant 4 digit user programmable
Flow Constant Range 0.001 to 9999 units
CONTROL
Control Algorithm On-Off batch control
Number Of Setpoints 2 independent batch setpoints
Batch Setpoint Range 0.00,001 to 999,999 unit
Cyclic Operation Selectable by Autoreset function
CONTROL OUTPUTS
Output Type Latched & pulsed
Output Actuation EM Relay 6 Amp @ 230 V AC
ANALOG OUTPUT
Output Signal 4 to 20 mA standard
Current Output Selections 0 to 20 mA, 4 to 20mA, 20 to 0 mA, 20 to 4 mA
Output Load 600 Ω maximum
Isolation 500 V DC with respect to control or input
INDICATION
Flow Indication 4 digit with kilo & milli LEDs
Batch Indication Direct indication in 6 digits
PV & SV Display 6 digit 14.2 mm for batch
Output Status Indication Output1 & Output2 LEDs
Decimal Point "Autoranging" upto 6 digit
SETUP & SECURITY
Setup Display Automatic display
Setup Programming By keypad on facia
Setup Memory Non volatile EEPROM
Programme Security 6 digit user editable password
COMMUNICATION
Communication RS232 full duplex communication
Baud Rate 1200 / 1400 / 4800 / 9600 / 19200 baud
Transmission Delay 1 to 9999 seconds
AUXILIARY OUTPUT
Output Configuration Control or external counter
Pulse Counter (Counter Mode) From 1 to 9999 counts to o/p pulses
Pulse On Time 0.01 seconds to 99.99 seconds
Pulse Off  Time 0.01 seconds to 99.99 seconds
Output Actuation EM relay 6A @ 230V AC (standard)
GENERAL
Key Pad 6 digit keypad on facia
Power Supply 230 V AC ± 10% 50 / 60 Hz
Power Consumption 6 VA (max.)
Operating Temperature 100 to 500C Ambient
Terminals Suitable for 1.5mm2 wire
Mounting Panel mounting
Panel Cutout 92 X 92 mm (H X W)
Enclosure 96(H) X 96(W) X 150(D) mm

 
New Page 1
Copyright © AUTOPRO 2007. All rights reserved.